Luminaire characteristics:
- Power: 40 Watts.
- Length 120 cm.
- Luminous flux - 5300 Lumens.
- Supply voltage - 220 V. 50/60 Hz.
The linear LED phytoluminaire is assembled on the basis of modern Samsung LM281B+Pro LEDs, which have one of the best light output values - up to 213 Lm/W, which is much higher than the efficiency of sodium lamps.
Designed to illuminate plants, seedlings at all stages of their life cycle.
The luminaire uses LEDs of the spectral composition: 3000K, 3500K, 4000K, which allows covering the entire range of the visible part of the spectrum with a peak in the blue zone. To form a peak in the red zone, necessary to stimulate flowering, red LEDs with a wavelength of 630 - 650 nm are added.
Each luminaire has a built-in driver and is equipped with a 1.5 meter mains cable with a plug.
On both ends of the luminaire there are sockets for connecting a network cable or an adapter for connecting it to another luminaire. The convenience of linear luminaires is that you can independently design and assemble lighting for your box of any size and power, simply by connecting one luminaire in series with another using adapters.
With overhead lighting, as your plant grows and its crown grows, its lower part is shading. This problem is easily eliminated by installing side lighting using the same linear fixtures.
The LEDs are covered with a transparent plastic blister, which protects them from water splashes during irrigation.
Maintains performance in the temperature range + 40 - 40 degrees C.
Service life - not less than 50 000 hours.
Manufacturer: DIY ELECTRONIX. China
After installing the lamp, do not forget to remove the protective film from the blister.