PRA 250 W. by WellGrow

Electromagnetic ballast (PRA) for HPS and MGL from WellGrow. Power 250 watts.

Control gear for starting and maintaining the operating mode of combustion of gas-discharge lamps of the DNaT and MGL types with a power of 250 watts. The ballast does not require the connection of any additional equipment, since all the parts necessary for starting and burning the lamp are already assembled inside the factory case.

To connect the ballast you do not need to be an electrician, just connect one of the ballast wires to the cartridge with a lamp on the reflector or kultub, and plug the second one (with a plug at the end) into the socket.

The length of both wires is 2 meters, which is quite enough to place the control gear in a place convenient for you.

Important:

- Do not turn on the device in the network if the lamp is not connected to it;

- Do not block the ballast vents, locate it in a place where there is fresh air supply to cool it.

- Only use a lamp of the correct wattage with the ballast.